This article mainly researches on the causes and controlling of ultra-low carbon steel carburetion.
点研究了鞍钢二炼钢厂超低碳钢增碳原因及控制措施。
This article mainly researches on the causes and controlling of ultra-low carbon steel carburetion.
点研究了鞍钢二炼钢厂超低碳钢增碳原因及控制措施。
This paper studied emphatically the heat steadiness of naphthaline and compatibility of naphthaline with carbon steel.
本文着的热稳定性以及碳钢
间的相容性进行实
研究.
Al dip calorizing of carbon steel and structure and properties of surface layer of aluminized steel were described.
介绍了碳钢表面热浸镀铝工艺和镀铝结构特征。
Note the material and anticorrosion requirements of Sand Scraper, Harrower, Otherwise supplied according to carbon steel with normal anticorrosion.
分别注明刮砂机、耙砂机的材质和防腐要求,不注明表示均按碳钢和普通防腐订货。
By way of “raising high carbon content and post blowing” as well as recarburization practice can the high carbon steel of fine quality be refined in the converter.
通过“高拉补吹”、炉后增碳工艺,转炉能够冶炼出合格的高碳钢。
声明:以上例句、词性分类均由互联网资源自动生成,部分未经过人工审核,其表达内容亦不代表本软件的观点;若发现问题,欢迎向我们指正。
This article mainly researches on the causes and controlling of ultra-low carbon steel carburetion.
重点研究了鞍二炼
厂超低碳
增碳原因及控制措施。
This paper studied emphatically the heat steadiness of naphthaline and compatibility of naphthaline with carbon steel.
本文着重对萘的热稳定性以及碳萘间的相容性进行实
研究.
Al dip calorizing of carbon steel and structure and properties of surface layer of aluminized steel were described.
介绍了碳表面热浸镀铝工艺和镀铝层组织结构特征。
Note the material and anticorrosion requirements of Sand Scraper, Harrower, Otherwise supplied according to carbon steel with normal anticorrosion.
分别注明刮砂机、耙砂机的材质和防腐要求,不注明表示均按碳和普通防腐订货。
By way of “raising high carbon content and post blowing” as well as recarburization practice can the high carbon steel of fine quality be refined in the converter.
通过“高”、炉后增碳工艺,转炉能够冶炼出合格的高碳
。
声明:以上例句、词性分类均由互联网资源自动生成,部分未经过人工审核,其表达内容亦不代表本软件的观点;若发现问题,欢迎向我们指正。
This article mainly researches on the causes and controlling of ultra-low carbon steel carburetion.
重点研究了鞍钢二炼钢厂超低碳钢增碳原因及控制措施。
This paper studied emphatically the heat steadiness of naphthaline and compatibility of naphthaline with carbon steel.
本文着重对萘的热稳定性以及碳钢萘间的相容性进行实研究.
Al dip calorizing of carbon steel and structure and properties of surface layer of aluminized steel were described.
介绍了碳钢表面热浸镀铝工艺和镀铝层组织结构特征。
Note the material and anticorrosion requirements of Sand Scraper, Harrower, Otherwise supplied according to carbon steel with normal anticorrosion.
分别注明刮砂机、耙砂机的材质和防要求,不注明表示均按碳钢和普通防
。
By way of “raising high carbon content and post blowing” as well as recarburization practice can the high carbon steel of fine quality be refined in the converter.
通过“高拉补吹”、炉后增碳工艺,转炉能够冶炼出合格的高碳钢。
声明:以上例句、词性分类均由互网资源自动生成,部分未经过人工审核,其表达内容亦不代表本软件的观点;若发现问题,欢迎向我们指正。
This article mainly researches on the causes and controlling of ultra-low carbon steel carburetion.
重点研究了鞍钢二炼钢厂钢增
原因及控制措施。
This paper studied emphatically the heat steadiness of naphthaline and compatibility of naphthaline with carbon steel.
本文着重对萘热稳定性以及
钢萘间
相容性进行实
研究.
Al dip calorizing of carbon steel and structure and properties of surface layer of aluminized steel were described.
介绍了钢表面热浸镀铝工艺和镀铝层组织结构特征。
Note the material and anticorrosion requirements of Sand Scraper, Harrower, Otherwise supplied according to carbon steel with normal anticorrosion.
分别注明刮砂、耙砂
质和防腐要求,不注明表示均按
钢和普通防腐订货。
By way of “raising high carbon content and post blowing” as well as recarburization practice can the high carbon steel of fine quality be refined in the converter.
通过“高拉补吹”、炉后增工艺,转炉能够冶炼出合格
高
钢。
声明:以上例句、词性分类均由互联网资源自动生成,部分未经过人工审核,其表达内容亦不代表本软件观点;若发现问题,欢迎向我们指正。
This article mainly researches on the causes and controlling of ultra-low carbon steel carburetion.
重点研究了鞍钢二炼钢厂超低碳钢增碳原因及控制措施。
This paper studied emphatically the heat steadiness of naphthaline and compatibility of naphthaline with carbon steel.
本文着重对萘的热稳定性以及碳钢萘间的相容性进行实研究.
Al dip calorizing of carbon steel and structure and properties of surface layer of aluminized steel were described.
介绍了碳钢表面热浸镀铝和镀铝层组织结构特征。
Note the material and anticorrosion requirements of Sand Scraper, Harrower, Otherwise supplied according to carbon steel with normal anticorrosion.
分别注明刮砂机、耙砂机的材质和防腐要求,不注明表示均按碳钢和普通防腐订货。
By way of “raising high carbon content and post blowing” as well as recarburization practice can the high carbon steel of fine quality be refined in the converter.
通过“高拉补吹”、炉后增碳,
炉能够冶炼出合格的高碳钢。
声明:以上例句、词性分类均由互联网资源自动生成,部分未经过人审核,其表达内容亦不代表本软件的观点;若发现问题,欢迎向我们指正。
This article mainly researches on the causes and controlling of ultra-low carbon steel carburetion.
重点研究了鞍钢二炼钢厂超低碳钢增碳原因及控制措施。
This paper studied emphatically the heat steadiness of naphthaline and compatibility of naphthaline with carbon steel.
本文着重对萘的热稳定性以及碳钢萘间的相容性进行实研究.
Al dip calorizing of carbon steel and structure and properties of surface layer of aluminized steel were described.
介绍了碳钢表面热浸镀铝工艺和镀铝层组织结构特征。
Note the material and anticorrosion requirements of Sand Scraper, Harrower, Otherwise supplied according to carbon steel with normal anticorrosion.
分别注明刮砂机、耙砂机的材质和防腐要求,不注明表示均按碳钢和普通防腐订货。
By way of “raising high carbon content and post blowing” as well as recarburization practice can the high carbon steel of fine quality be refined in the converter.
通过“高拉补吹”、后增碳工艺,转
冶炼出合格的高碳钢。
声明:以上例句、词性分类均由互联网资源自动生成,部分未经过人工审核,其表达内容亦不代表本软件的观点;若发现问题,欢迎向我们指正。
This article mainly researches on the causes and controlling of ultra-low carbon steel carburetion.
重点研究了鞍钢二炼钢厂超低碳钢增碳原因措施。
This paper studied emphatically the heat steadiness of naphthaline and compatibility of naphthaline with carbon steel.
本文着重对萘的热稳定性以碳钢萘间的相容性进行实
研究.
Al dip calorizing of carbon steel and structure and properties of surface layer of aluminized steel were described.
介绍了碳钢表面热浸镀铝工艺和镀铝层组织结构特征。
Note the material and anticorrosion requirements of Sand Scraper, Harrower, Otherwise supplied according to carbon steel with normal anticorrosion.
分刮砂机、耙砂机的材质和防腐要求,不
表示均按碳钢和普通防腐订货。
By way of “raising high carbon content and post blowing” as well as recarburization practice can the high carbon steel of fine quality be refined in the converter.
通过“高拉补吹”、炉后增碳工艺,转炉能够冶炼出合格的高碳钢。
声:以上例句、词性分类均由互联网资源自动生成,部分未经过人工审核,其表达内容亦不代表本软件的观点;若发现问题,欢迎向我们指正。
This article mainly researches on the causes and controlling of ultra-low carbon steel carburetion.
点研究了鞍钢二炼钢厂超低碳钢增碳原因及控制措施。
This paper studied emphatically the heat steadiness of naphthaline and compatibility of naphthaline with carbon steel.
本文着对萘的热稳定性以及碳钢萘间的相容性进行实
研究.
Al dip calorizing of carbon steel and structure and properties of surface layer of aluminized steel were described.
介绍了碳钢表面热浸镀铝工艺和镀铝层组织结构特征。
Note the material and anticorrosion requirements of Sand Scraper, Harrower, Otherwise supplied according to carbon steel with normal anticorrosion.
分别注明刮砂机、耙砂机的材质和防腐要求,不注明表碳钢和普通防腐订货。
By way of “raising high carbon content and post blowing” as well as recarburization practice can the high carbon steel of fine quality be refined in the converter.
通过“高拉补吹”、炉后增碳工艺,转炉能够冶炼出合格的高碳钢。
声明:以上例、词性分类
由互联网资源自动生成,部分未经过人工审核,其表达内容亦不代表本软件的观点;若发现问题,欢迎向我们指正。
This article mainly researches on the causes and controlling of ultra-low carbon steel carburetion.
重点研究了鞍钢二炼钢厂超低钢增
原因
控制措施。
This paper studied emphatically the heat steadiness of naphthaline and compatibility of naphthaline with carbon steel.
本文着重对萘的热稳定性钢萘间的相容性进行实
研究.
Al dip calorizing of carbon steel and structure and properties of surface layer of aluminized steel were described.
介绍了钢表面热
工艺和
层组织结构特征。
Note the material and anticorrosion requirements of Sand Scraper, Harrower, Otherwise supplied according to carbon steel with normal anticorrosion.
分别注明刮砂机、耙砂机的材质和防腐要求,不注明表示均按钢和普通防腐订货。
By way of “raising high carbon content and post blowing” as well as recarburization practice can the high carbon steel of fine quality be refined in the converter.
通过“高拉补吹”、炉后增工艺,转炉能够冶炼出合格的高
钢。
声明:上例句、词性分类均由互联网资源自动生成,部分未经过人工审核,其表达内容亦不代表本软件的观点;若发现问题,欢迎向我们指正。