Polybutylene terephthalate (PBT) is a semicrystalline thermoplastic polymer formed by a condensation process.

PBT是一种通过浓缩成型而制备的，一种半结晶热塑性塑料。

Made of shaping Polytetrafluorethylene Resin by moulding in ordinary temperature then through high heat sintering.

将聚四氟乙烯树脂在常温下用模压法成型后再经温烧结制成。

The results indicate the melt processible fluoroplastics PVDF has good processing property of injection molding.

结果显示可熔融氟塑料PVDF具有较好的注射成型加工性能。

Shapen technological process and equipment of mold-made synchronous belt is introduced.

模压法橡胶同步带成型工艺流程及装备。

The molding method,process,and the equipment of thermoset runnerless injection molding have been discussed in this paper.

论述了无流道热固性塑料注射成型的方法、工艺、设备和模具设计方面的问题。

Bulk Molding Compound with high strength material with excellent moldability and moderate strength.Used in multi-purpose applications.

玻璃纤维状模塑料，等度和优异电性能，低成本，良好的成型性。广泛应用于各种领域。

Intensive Mixer(Banbury Mixer), Kneader Mixer, Pelletizer, Rubber Extruder, Rubber Preformer, 2 Roll Mixing Mill, Lab Machinery.

速混练、力混合、造粒、橡胶挤押、过滤、橡胶粗胚成型、橡塑胶实验。

This paper discribes electrosparking machine controller with 8031 SCP and it's implementation of aoftwate and hardware.

由8031单片组成的电火花成型床控制器及其软、硬件配置.

It is mainly used for the forming cutting of fur, paper, leather, synthetize materical and nonmetal material.

主要适用于皮革、纸板、泡沫、人造革、布塑及合成纤维和非金属材料借助于刀模成型裁断。

It also can fried dumplings, egg roll, samosa, wonton and other foods by changing different forming part.

更换成型头还可以包制锅贴、春卷、咖喱角和馄饨等食品。

The results show that underlayer oxhide,coloring agent and diluent solvent are the important effects of producing transfer-film leather.

研究了移膜革硫化成型效果的影响因素,结果表明,在移膜革生产中,所选用的二层皮、着色剂及稀释溶剂是其主要的影响因素。

The same forces and mechanisms responsible for size enlargement in roller compaction are responsible for bond formation during tabletting.

碾压中施加于颗粒大的力和理也用于压片的粘合成型。

It is vibrating caulking forming by good quality binder.Good thermal conductivity,high compressive resistance,high anti-heat shocking ,unattackable,abrasion resistance,long service life.

采用优质结合剂，经振动密实成型，热导率好，耐压度，抗热震，耐侵蚀，耐冲刷，使用寿命长。

Straw, a kind of natural biodegradable material, was used as reinforced fibers for preparing nonrecurring biodegradable flowerpots by compression molding technology.

采用廉价的秸秆为材料,以淀粉为基体材料,通过模压成型制备出一次性可生物降解花盆。

Together with the vacuum debubbling barrel, injecting and forming the debubbled mud with the air pressure in the vacuum debubbling barrel.

与真空脱泡桶配套使用，利用真空脱泡桶中的空气压力将脱泡好的泥浆进行注浆成型。

It is used to shape the packaged liquid lactone tofu by means of heating and sterilize it by means of pasteurism.

用于将封装完毕的液体内酯豆腐加热成型及巴氏灭菌。

The manual stamping or casting is used to mold eave tile, drip tile, tile with animals, nail head and glassless window.

琉璃瓦中的勾头，滴水瓦件以及走兽、钉帽、花窗和正吻、垂兽等构件采用手工成型或注浆成型。

Methods of enhancing dispersing mixability in dynamic molding process,the structure of the dynamic mixing extruder and its operation principles were introduced.

了基于动态成型过程化分散混炼的方法以及实现这些方法的动态混炼挤出的结构及工作原理。

It consists of main decoiler, assistant decoiler, guide rack, foming machine, forming mould, flatting device, punching device, cutting-to-length, collection table, electrical control， etc.

设备由主放料架、副放料架、导向架、成型主、成型模具、校正构、冲孔构、切断部分、收料台、电器控制部分等组成。

Aimed at utilization of iron resources in pyritic slag,the study on production of metallized agglomerate with pyritic slag through coal based DR process was conducted.

为合理利用硫酸烧渣中的铁资源，进行了煤基直接还原生产金属化块的研究，提出了润磨造球-预热焙烧-磁选-冷固结成型的新工艺流程。

Polybutylene terephthalate (PBT) is a semicrystalline thermoplastic polymer formed by a condensation process.

PBT是一种通过浓缩成型而制备的，一种半结晶热性料。

Made of shaping Polytetrafluorethylene Resin by moulding in ordinary temperature then through high heat sintering.

将聚四氟乙烯树脂在常温下用压法成型后再经温烧结制成。

The results indicate the melt processible fluoroplastics PVDF has good processing property of injection molding.

结果显示可熔融氟料PVDF具有较好的注射成型加工性能。

Shapen technological process and equipment of mold-made synchronous belt is introduced.

介绍压法橡同步带成型工艺流程及装备。

The molding method,process,and the equipment of thermoset runnerless injection molding have been discussed in this paper.

论述了无流道热固性料注射成型的方法、工艺、设备和具设计方面的问题。

Bulk Molding Compound with high strength material with excellent moldability and moderate strength.Used in multi-purpose applications.

玻璃纤维增强团料，等强度和优异电性能，低成本，良好的成型性。广泛应用于各种领域。

Intensive Mixer(Banbury Mixer), Kneader Mixer, Pelletizer, Rubber Extruder, Rubber Preformer, 2 Roll Mixing Mill, Lab Machinery.

速混练机、强力混合机、造粒机、橡挤押机、过滤机、橡粗胚成型机、橡机。

This paper discribes electrosparking machine controller with 8031 SCP and it's implementation of aoftwate and hardware.

介绍由8031单片机组成的电火花成型机床控制器及其软、硬件配置.

It is mainly used for the forming cutting of fur, paper, leather, synthetize materical and nonmetal material.

主要适用于皮革、纸板、泡沫、人造革、布及合成纤维和非金属材料借助于刀成型裁断。

It also can fried dumplings, egg roll, samosa, wonton and other foods by changing different forming part.

更换成型机头还可以包制锅贴、春卷、咖喱角和馄饨等食品。

The results show that underlayer oxhide,coloring agent and diluent solvent are the important effects of producing transfer-film leather.

研究了移膜革硫化成型效果的影响因素,结果表明,在移膜革生产中,所选用的二层皮、着色剂及稀释溶剂是其主要的影响因素。

The same forces and mechanisms responsible for size enlargement in roller compaction are responsible for bond formation during tabletting.

碾压中施加于颗粒增大的力和机理也用于压片的粘合成型。

It is vibrating caulking forming by good quality binder.Good thermal conductivity,high compressive resistance,high anti-heat shocking ,unattackable,abrasion resistance,long service life.

采用优质结合剂，经振动密成型，热导率好，耐压强度，抗热震，耐侵蚀，耐冲刷，使用寿命长。

Straw, a kind of natural biodegradable material, was used as reinforced fibers for preparing nonrecurring biodegradable flowerpots by compression molding technology.

采用廉价的秸秆为增强材料,以淀粉为基体材料,通过压成型制备出一次性可生物降解花盆。

Together with the vacuum debubbling barrel, injecting and forming the debubbled mud with the air pressure in the vacuum debubbling barrel.

与真空脱泡桶配套使用，利用真空脱泡桶中的空气压力将脱泡好的泥浆进行注浆成型。

It is used to shape the packaged liquid lactone tofu by means of heating and sterilize it by means of pasteurism.

用于将封装完毕的液体内酯豆腐加热成型及巴氏灭菌。

The manual stamping or casting is used to mold eave tile, drip tile, tile with animals, nail head and glassless window.

琉璃瓦中的勾头，滴水瓦件以及走兽、钉帽、花窗和正吻、垂兽等构件采用手工成型或注浆成型。

Methods of enhancing dispersing mixability in dynamic molding process,the structure of the dynamic mixing extruder and its operation principles were introduced.

介绍了基于动态成型过程强化分散混炼的方法以及现这些方法的动态混炼挤出机的结构及工作原理。

It consists of main decoiler, assistant decoiler, guide rack, foming machine, forming mould, flatting device, punching device, cutting-to-length, collection table, electrical control， etc.

设备由主放料架、副放料架、导向机架、成型主机、成型具、校正机构、冲孔机构、切断部分、收料台、电器控制部分等组成。

Aimed at utilization of iron resources in pyritic slag,the study on production of metallized agglomerate with pyritic slag through coal based DR process was conducted.

为合理利用硫酸烧渣中的铁资源，进行了煤基直接还原生产金属化团块的研究，提出了润磨造球-预热焙烧-磁选-冷固结成型的新工艺流程。

Polybutylene terephthalate (PBT) is a semicrystalline thermoplastic polymer formed by a condensation process.

PBT是一种通过浓缩型而制备，一种半结晶热塑性塑料。

Made of shaping Polytetrafluorethylene Resin by moulding in ordinary temperature then through high heat sintering.

将聚四氟乙烯树脂在常温下用模压法型后再经温烧结制。

The results indicate the melt processible fluoroplastics PVDF has good processing property of injection molding.

结果显示可熔融氟塑料PVDF具有较好注射型加工性能。

Shapen technological process and equipment of mold-made synchronous belt is introduced.

介绍模压法橡胶同步带型工艺流程及装备。

The molding method,process,and the equipment of thermoset runnerless injection molding have been discussed in this paper.

论述了无流道热固性塑料注射型方法、工艺、设备和模具设计方面。

Bulk Molding Compound with high strength material with excellent moldability and moderate strength.Used in multi-purpose applications.

玻璃纤维增强团状模塑料，等强度和优异电性能，低本，良好型性。广泛应用于各种领域。

Intensive Mixer(Banbury Mixer), Kneader Mixer, Pelletizer, Rubber Extruder, Rubber Preformer, 2 Roll Mixing Mill, Lab Machinery.

速混练机、强力混合机、造粒机、橡胶挤押机、过滤机、橡胶粗胚型机、橡塑胶实验机。

This paper discribes electrosparking machine controller with 8031 SCP and it's implementation of aoftwate and hardware.

介绍由8031单片机电火花型机床控制器及其软、硬件配置.

It is mainly used for the forming cutting of fur, paper, leather, synthetize materical and nonmetal material.

主要适用于皮革、纸板、泡沫、人造革、布塑及合纤维和非金属材料借助于刀模型裁断。

It also can fried dumplings, egg roll, samosa, wonton and other foods by changing different forming part.

更换型机头还可以包制锅贴、春卷、咖喱角和馄饨等食品。

The results show that underlayer oxhide,coloring agent and diluent solvent are the important effects of producing transfer-film leather.

研究了移膜革硫化型效果影响因素,结果表明,在移膜革生产中,所选用二层皮、着色剂及稀释溶剂是其主要影响因素。

The same forces and mechanisms responsible for size enlargement in roller compaction are responsible for bond formation during tabletting.

碾压中施加于颗粒增大力和机理也用于压片粘合型。

It is vibrating caulking forming by good quality binder.Good thermal conductivity,high compressive resistance,high anti-heat shocking ,unattackable,abrasion resistance,long service life.

采用优质结合剂，经振动密实型，热导率好，耐压强度，抗热震，耐侵蚀，耐冲刷，使用寿命长。

Straw, a kind of natural biodegradable material, was used as reinforced fibers for preparing nonrecurring biodegradable flowerpots by compression molding technology.

采用廉价秸秆为增强材料,以淀粉为基体材料,通过模压型制备出一次性可生物降解花盆。

Together with the vacuum debubbling barrel, injecting and forming the debubbled mud with the air pressure in the vacuum debubbling barrel.

与真空脱泡桶配套使用，利用真空脱泡桶中空气压力将脱泡好泥浆进行注浆型。

It is used to shape the packaged liquid lactone tofu by means of heating and sterilize it by means of pasteurism.

用于将封装完毕液体内酯豆腐加热型及巴氏灭菌。

The manual stamping or casting is used to mold eave tile, drip tile, tile with animals, nail head and glassless window.

琉璃瓦中勾头，滴水瓦件以及走兽、钉帽、花窗和正吻、垂兽等构件采用手工型或注浆型。

Methods of enhancing dispersing mixability in dynamic molding process,the structure of the dynamic mixing extruder and its operation principles were introduced.

介绍了基于动态型过程强化分散混炼方法以及实现这些方法动态混炼挤出机结构及工作原理。

It consists of main decoiler, assistant decoiler, guide rack, foming machine, forming mould, flatting device, punching device, cutting-to-length, collection table, electrical control， etc.

设备由主放料架、副放料架、导向机架、型主机、型模具、校正机构、冲孔机构、切断部分、收料台、电器控制部分等。

Aimed at utilization of iron resources in pyritic slag,the study on production of metallized agglomerate with pyritic slag through coal based DR process was conducted.

为合理利用硫酸烧渣中铁资源，进行了煤基直接还原生产金属化团块研究，提出了润磨造球-预热焙烧-磁选-冷固结型新工艺流程。

Polybutylene terephthalate (PBT) is a semicrystalline thermoplastic polymer formed by a condensation process.

PBT是一种通过浓缩而制备的，一种半结晶热塑性塑料。

Made of shaping Polytetrafluorethylene Resin by moulding in ordinary temperature then through high heat sintering.

将聚四氟乙烯树脂在常温下用模压法后再经温烧结制。

The results indicate the melt processible fluoroplastics PVDF has good processing property of injection molding.

结果显示可熔融氟塑料PVDF具有较好的注射加工性能。

Shapen technological process and equipment of mold-made synchronous belt is introduced.

介绍模压法橡胶同步带工艺流程及装备。

The molding method,process,and the equipment of thermoset runnerless injection molding have been discussed in this paper.

论述了无流道热固性塑料注射的方法、工艺、设备和模具设计方面的问题。

Bulk Molding Compound with high strength material with excellent moldability and moderate strength.Used in multi-purpose applications.

玻璃纤维增强团状模塑料，等强度和优异电性能，低本，良好的性。广泛应用于各种领域。

Intensive Mixer(Banbury Mixer), Kneader Mixer, Pelletizer, Rubber Extruder, Rubber Preformer, 2 Roll Mixing Mill, Lab Machinery.

速混练机、强力混合机、造粒机、橡胶挤押机、过滤机、橡胶粗胚机、橡塑胶实验机。

This paper discribes electrosparking machine controller with 8031 SCP and it's implementation of aoftwate and hardware.

介绍由8031单片机组的电火花机床控制器及其软、硬件配置.

It is mainly used for the forming cutting of fur, paper, leather, synthetize materical and nonmetal material.

主要适用于皮、纸板、泡沫、人造、布塑及合纤维和非金属材料借助于刀模裁断。

It also can fried dumplings, egg roll, samosa, wonton and other foods by changing different forming part.

更换机头还可以包制锅贴、春卷、咖喱角和馄饨等食品。

The results show that underlayer oxhide,coloring agent and diluent solvent are the important effects of producing transfer-film leather.

研究了硫化效果的影响因素,结果表明,在生产中,所选用的二层皮、着色剂及稀释溶剂是其主要的影响因素。

The same forces and mechanisms responsible for size enlargement in roller compaction are responsible for bond formation during tabletting.

碾压中施加于颗粒增大的力和机理也用于压片的粘合。

It is vibrating caulking forming by good quality binder.Good thermal conductivity,high compressive resistance,high anti-heat shocking ,unattackable,abrasion resistance,long service life.

采用优质结合剂，经振动密实，热导率好，耐压强度，抗热震，耐侵蚀，耐冲刷，使用寿命长。

Straw, a kind of natural biodegradable material, was used as reinforced fibers for preparing nonrecurring biodegradable flowerpots by compression molding technology.

采用廉价的秸秆为增强材料,以淀粉为基体材料,通过模压制备出一次性可生物降解花盆。

Together with the vacuum debubbling barrel, injecting and forming the debubbled mud with the air pressure in the vacuum debubbling barrel.

与真空脱泡桶配套使用，利用真空脱泡桶中的空气压力将脱泡好的泥浆进行注浆。

It is used to shape the packaged liquid lactone tofu by means of heating and sterilize it by means of pasteurism.

用于将封装完毕的液体内酯豆腐加热及巴氏灭菌。

The manual stamping or casting is used to mold eave tile, drip tile, tile with animals, nail head and glassless window.

琉璃瓦中的勾头，滴水瓦件以及走兽、钉帽、花窗和正吻、垂兽等构件采用手工或注浆。

Methods of enhancing dispersing mixability in dynamic molding process,the structure of the dynamic mixing extruder and its operation principles were introduced.

介绍了基于动态过程强化分散混炼的方法以及实现这些方法的动态混炼挤出机的结构及工作原理。

It consists of main decoiler, assistant decoiler, guide rack, foming machine, forming mould, flatting device, punching device, cutting-to-length, collection table, electrical control， etc.

设备由主放料架、副放料架、导向机架、主机、模具、校正机构、冲孔机构、切断部分、收料台、电器控制部分等组。

Aimed at utilization of iron resources in pyritic slag,the study on production of metallized agglomerate with pyritic slag through coal based DR process was conducted.

为合理利用硫酸烧渣中的铁资源，进行了煤基直接还原生产金属化团块的研究，提出了润磨造球-预热焙烧-磁选-冷固结的新工艺流程。

Polybutylene terephthalate (PBT) is a semicrystalline thermoplastic polymer formed by a condensation process.

PBT是一种通过浓缩成型而制备的，一种半结晶热塑性塑。

Made of shaping Polytetrafluorethylene Resin by moulding in ordinary temperature then through high heat sintering.

将聚四氟乙烯树脂在常温下用模压法成型后再经温烧结制成。

The results indicate the melt processible fluoroplastics PVDF has good processing property of injection molding.

结果显示可熔融氟塑PVDF具有较好的注射成型加工性能。

Shapen technological process and equipment of mold-made synchronous belt is introduced.

介绍模压法同步带成型工艺流程及装备。

The molding method,process,and the equipment of thermoset runnerless injection molding have been discussed in this paper.

论述了无流道热固性塑注射成型的方法、工艺、设备和模具设计方面的问题。

Bulk Molding Compound with high strength material with excellent moldability and moderate strength.Used in multi-purpose applications.

玻璃纤维增强团状模塑，等强度和优异电性能，低成本，良好的成型性。广泛应用于各种领域。

Intensive Mixer(Banbury Mixer), Kneader Mixer, Pelletizer, Rubber Extruder, Rubber Preformer, 2 Roll Mixing Mill, Lab Machinery.

速混练机、强力混合机、造粒机、挤押机、过滤机、粗胚成型机、塑实验机。

This paper discribes electrosparking machine controller with 8031 SCP and it's implementation of aoftwate and hardware.

介绍由8031单片机组成的电火花成型机床控制器及其软、硬件配置.

It is mainly used for the forming cutting of fur, paper, leather, synthetize materical and nonmetal material.

主要适用于皮革、纸板、泡沫、人造革、布塑及合成纤维和非金借助于刀模成型裁断。

It also can fried dumplings, egg roll, samosa, wonton and other foods by changing different forming part.

更换成型机头还可以包制锅贴、春卷、咖喱角和馄饨等食品。

The results show that underlayer oxhide,coloring agent and diluent solvent are the important effects of producing transfer-film leather.

研究了移膜革硫化成型效果的影响因素,结果表明,在移膜革生产中,所选用的二层皮、着色剂及稀释溶剂是其主要的影响因素。

The same forces and mechanisms responsible for size enlargement in roller compaction are responsible for bond formation during tabletting.

碾压中施加于颗粒增大的力和机理也用于压片的粘合成型。

It is vibrating caulking forming by good quality binder.Good thermal conductivity,high compressive resistance,high anti-heat shocking ,unattackable,abrasion resistance,long service life.

采用优质结合剂，经振动密实成型，热导率好，耐压强度，抗热震，耐侵蚀，耐冲刷，使用寿命长。

Straw, a kind of natural biodegradable material, was used as reinforced fibers for preparing nonrecurring biodegradable flowerpots by compression molding technology.

采用廉价的秸秆为增强,以淀粉为基体,通过模压成型制备出一次性可生物降解花盆。

Together with the vacuum debubbling barrel, injecting and forming the debubbled mud with the air pressure in the vacuum debubbling barrel.

与真空脱泡桶配套使用，利用真空脱泡桶中的空气压力将脱泡好的泥浆进行注浆成型。

It is used to shape the packaged liquid lactone tofu by means of heating and sterilize it by means of pasteurism.

用于将封装完毕的液体内酯豆腐加热成型及巴氏灭菌。

The manual stamping or casting is used to mold eave tile, drip tile, tile with animals, nail head and glassless window.

琉璃瓦中的勾头，滴水瓦件以及走兽、钉帽、花窗和正吻、垂兽等构件采用手工成型或注浆成型。

Methods of enhancing dispersing mixability in dynamic molding process,the structure of the dynamic mixing extruder and its operation principles were introduced.

介绍了基于动态成型过程强化分散混炼的方法以及实现这些方法的动态混炼挤出机的结构及工作原理。

It consists of main decoiler, assistant decoiler, guide rack, foming machine, forming mould, flatting device, punching device, cutting-to-length, collection table, electrical control， etc.

设备由主放架、副放架、导向机架、成型主机、成型模具、校正机构、冲孔机构、切断部分、收台、电器控制部分等组成。

Aimed at utilization of iron resources in pyritic slag,the study on production of metallized agglomerate with pyritic slag through coal based DR process was conducted.

为合理利用硫酸烧渣中的铁资源，进行了煤基直接还原生产金化团块的研究，提出了润磨造球-预热焙烧-磁选-冷固结成型的新工艺流程。

Polybutylene terephthalate (PBT) is a semicrystalline thermoplastic polymer formed by a condensation process.

PBT是一种通过浓缩型而制备的，一种半结晶热塑性塑料。

Made of shaping Polytetrafluorethylene Resin by moulding in ordinary temperature then through high heat sintering.

将聚四氟乙烯树脂在常温下用模压法型后再经温烧结制。

The results indicate the melt processible fluoroplastics PVDF has good processing property of injection molding.

结果显示可熔融氟塑料PVDF具有较好的注射型加工性能。

Shapen technological process and equipment of mold-made synchronous belt is introduced.

介绍模压法橡胶同步带型工艺流程及装备。

The molding method,process,and the equipment of thermoset runnerless injection molding have been discussed in this paper.

论述了无流道热固性塑料注射型的方法、工艺、设备模具设计方面的问题。

Bulk Molding Compound with high strength material with excellent moldability and moderate strength.Used in multi-purpose applications.

玻璃纤维增强团状模塑料，等强异电性能，低本，良好的型性。广泛应用于各种领域。

Intensive Mixer(Banbury Mixer), Kneader Mixer, Pelletizer, Rubber Extruder, Rubber Preformer, 2 Roll Mixing Mill, Lab Machinery.

速混练机、强力混合机、造粒机、橡胶挤押机、过滤机、橡胶型机、橡塑胶实验机。

This paper discribes electrosparking machine controller with 8031 SCP and it's implementation of aoftwate and hardware.

介绍由8031单片机组的电火花型机床控制器及其软、硬件配置.

It is mainly used for the forming cutting of fur, paper, leather, synthetize materical and nonmetal material.

主要适用于皮革、纸板、泡沫、人造革、布塑及合纤维非金属材料借助于刀模型裁断。

It also can fried dumplings, egg roll, samosa, wonton and other foods by changing different forming part.

更换型机头还可以包制锅贴、春卷、咖喱角馄饨等食品。

The results show that underlayer oxhide,coloring agent and diluent solvent are the important effects of producing transfer-film leather.

研究了移膜革硫化型效果的影响因素,结果表明,在移膜革生产中,所选用的二层皮、着色剂及稀释溶剂是其主要的影响因素。

The same forces and mechanisms responsible for size enlargement in roller compaction are responsible for bond formation during tabletting.

碾压中施加于颗粒增大的力机理也用于压片的粘合型。

It is vibrating caulking forming by good quality binder.Good thermal conductivity,high compressive resistance,high anti-heat shocking ,unattackable,abrasion resistance,long service life.

采用质结合剂，经振动密实型，热导率好，耐压强，抗热震，耐侵蚀，耐冲刷，使用寿命长。

Straw, a kind of natural biodegradable material, was used as reinforced fibers for preparing nonrecurring biodegradable flowerpots by compression molding technology.

采用廉价的秸秆为增强材料,以淀粉为基体材料,通过模压型制备出一次性可生物降解花盆。

Together with the vacuum debubbling barrel, injecting and forming the debubbled mud with the air pressure in the vacuum debubbling barrel.

与真空脱泡桶配套使用，利用真空脱泡桶中的空气压力将脱泡好的泥浆进行注浆型。

It is used to shape the packaged liquid lactone tofu by means of heating and sterilize it by means of pasteurism.

用于将封装完毕的液体内酯豆腐加热型及巴氏灭菌。

The manual stamping or casting is used to mold eave tile, drip tile, tile with animals, nail head and glassless window.

琉璃瓦中的勾头，滴水瓦件以及走兽、钉帽、花窗正吻、垂兽等构件采用手工型或注浆型。

Methods of enhancing dispersing mixability in dynamic molding process,the structure of the dynamic mixing extruder and its operation principles were introduced.

介绍了基于动态型过程强化分散混炼的方法以及实现这些方法的动态混炼挤出机的结构及工作原理。

It consists of main decoiler, assistant decoiler, guide rack, foming machine, forming mould, flatting device, punching device, cutting-to-length, collection table, electrical control， etc.

设备由主放料架、副放料架、导向机架、型主机、型模具、校正机构、冲孔机构、切断部分、收料台、电器控制部分等组。

Aimed at utilization of iron resources in pyritic slag,the study on production of metallized agglomerate with pyritic slag through coal based DR process was conducted.

为合理利用硫酸烧渣中的铁资源，进行了煤基直接还原生产金属化团块的研究，提出了润磨造球-预热焙烧-磁选-冷固结型的新工艺流程。

Polybutylene terephthalate (PBT) is a semicrystalline thermoplastic polymer formed by a condensation process.

PBT是一种通成型而制备的，一种半结晶热塑性塑料。

Made of shaping Polytetrafluorethylene Resin by moulding in ordinary temperature then through high heat sintering.

将聚四氟乙烯树脂在常温下用模压法成型后再经温烧结制成。

The results indicate the melt processible fluoroplastics PVDF has good processing property of injection molding.

结果显示可熔融氟塑料PVDF具有较好的注射成型加工性能。

Shapen technological process and equipment of mold-made synchronous belt is introduced.

介绍模压法橡胶同步带成型工艺流程装备。

The molding method,process,and the equipment of thermoset runnerless injection molding have been discussed in this paper.

论述了无流道热固性塑料注射成型的方法、工艺、设备和模具设计方面的问题。

Bulk Molding Compound with high strength material with excellent moldability and moderate strength.Used in multi-purpose applications.

玻璃纤维增强团状模塑料，等强度和优异电性能，低成本，良好的成型性。广泛应用于各种领域。

Intensive Mixer(Banbury Mixer), Kneader Mixer, Pelletizer, Rubber Extruder, Rubber Preformer, 2 Roll Mixing Mill, Lab Machinery.

速混练机、强力混合机、造粒机、橡胶挤押机、滤机、橡胶粗胚成型机、橡塑胶实验机。

This paper discribes electrosparking machine controller with 8031 SCP and it's implementation of aoftwate and hardware.

介绍由8031单片机组成的电火花成型机床控制器其软、硬件配置.

It is mainly used for the forming cutting of fur, paper, leather, synthetize materical and nonmetal material.

主要适用于皮革、纸板、泡沫、人造革、布塑合成纤维和非金属材料借助于刀模成型裁断。

It also can fried dumplings, egg roll, samosa, wonton and other foods by changing different forming part.

更换成型机头还可以包制锅贴、春卷、咖喱角和馄饨等食品。

The results show that underlayer oxhide,coloring agent and diluent solvent are the important effects of producing transfer-film leather.

研究了移膜革硫化成型效果的影响因素,结果表明,在移膜革生产中,所选用的二层皮、着色释溶是其主要的影响因素。

The same forces and mechanisms responsible for size enlargement in roller compaction are responsible for bond formation during tabletting.

碾压中施加于颗粒增大的力和机理也用于压片的粘合成型。

It is vibrating caulking forming by good quality binder.Good thermal conductivity,high compressive resistance,high anti-heat shocking ,unattackable,abrasion resistance,long service life.

采用优质结合，经振动密实成型，热导率好，耐压强度，抗热震，耐侵蚀，耐冲刷，使用寿命长。

Straw, a kind of natural biodegradable material, was used as reinforced fibers for preparing nonrecurring biodegradable flowerpots by compression molding technology.

采用廉价的秸秆为增强材料,以淀粉为基体材料,通模压成型制备出一次性可生物降解花盆。

Together with the vacuum debubbling barrel, injecting and forming the debubbled mud with the air pressure in the vacuum debubbling barrel.

与真空脱泡桶配套使用，利用真空脱泡桶中的空气压力将脱泡好的泥浆进行注浆成型。

It is used to shape the packaged liquid lactone tofu by means of heating and sterilize it by means of pasteurism.

用于将封装完毕的液体内酯豆腐加热成型巴氏灭菌。

The manual stamping or casting is used to mold eave tile, drip tile, tile with animals, nail head and glassless window.

琉璃瓦中的勾头，滴水瓦件以走兽、钉帽、花窗和正吻、垂兽等构件采用手工成型或注浆成型。

Methods of enhancing dispersing mixability in dynamic molding process,the structure of the dynamic mixing extruder and its operation principles were introduced.

介绍了基于动态成型程强化分散混炼的方法以实现这些方法的动态混炼挤出机的结构工作原理。

It consists of main decoiler, assistant decoiler, guide rack, foming machine, forming mould, flatting device, punching device, cutting-to-length, collection table, electrical control， etc.

设备由主放料架、副放料架、导向机架、成型主机、成型模具、校正机构、冲孔机构、切断部分、收料台、电器控制部分等组成。

Aimed at utilization of iron resources in pyritic slag,the study on production of metallized agglomerate with pyritic slag through coal based DR process was conducted.

为合理利用硫酸烧渣中的铁资源，进行了煤基直接还原生产金属化团块的研究，提出了润磨造球-预热焙烧-磁选-冷固结成型的新工艺流程。

Polybutylene terephthalate (PBT) is a semicrystalline thermoplastic polymer formed by a condensation process.

PBT是一种通过浓缩成型而制备的，一种半结性料。

Made of shaping Polytetrafluorethylene Resin by moulding in ordinary temperature then through high heat sintering.

将聚四氟乙烯树脂在常温下用模压法成型后再经温烧结制成。

The results indicate the melt processible fluoroplastics PVDF has good processing property of injection molding.

结果显示可熔融氟料PVDF具有较好的注射成型加工性能。

Shapen technological process and equipment of mold-made synchronous belt is introduced.

介绍模压法橡胶同步带成型工艺流程及装备。

The molding method,process,and the equipment of thermoset runnerless injection molding have been discussed in this paper.

论述了无流道固性料注射成型的方法、工艺、设备和模具设计方面的问题。

Bulk Molding Compound with high strength material with excellent moldability and moderate strength.Used in multi-purpose applications.

玻璃纤维增强团状模料，等强度和优异电性能，低成本，良好的成型性。广泛应用于各种领域。

Intensive Mixer(Banbury Mixer), Kneader Mixer, Pelletizer, Rubber Extruder, Rubber Preformer, 2 Roll Mixing Mill, Lab Machinery.

速混练机、强力混合机、造粒机、橡胶挤押机、过滤机、橡胶粗胚成型机、橡胶实验机。

This paper discribes electrosparking machine controller with 8031 SCP and it's implementation of aoftwate and hardware.

介绍由8031单片机组成的电火花成型机床控制器及其软、硬件配置.

It is mainly used for the forming cutting of fur, paper, leather, synthetize materical and nonmetal material.

主要适用于皮、纸板、泡沫、人造、布及合成纤维和非金属材料借助于刀模成型裁断。

It also can fried dumplings, egg roll, samosa, wonton and other foods by changing different forming part.

更换成型机头还可以包制锅贴、春卷、咖喱角和馄饨等食品。

The results show that underlayer oxhide,coloring agent and diluent solvent are the important effects of producing transfer-film leather.

研究了移膜硫化成型效果的影响因素,结果表明,在移膜中,所选用的二层皮、着色剂及稀释溶剂是其主要的影响因素。

The same forces and mechanisms responsible for size enlargement in roller compaction are responsible for bond formation during tabletting.

碾压中施加于颗粒增大的力和机理也用于压片的粘合成型。

It is vibrating caulking forming by good quality binder.Good thermal conductivity,high compressive resistance,high anti-heat shocking ,unattackable,abrasion resistance,long service life.

采用优质结合剂，经振动密实成型，导率好，耐压强度，抗震，耐侵蚀，耐冲刷，使用寿命长。

Straw, a kind of natural biodegradable material, was used as reinforced fibers for preparing nonrecurring biodegradable flowerpots by compression molding technology.

采用廉价的秸秆为增强材料,以淀粉为基体材料,通过模压成型制备出一次性可物降解花盆。

Together with the vacuum debubbling barrel, injecting and forming the debubbled mud with the air pressure in the vacuum debubbling barrel.

与真空脱泡桶配套使用，利用真空脱泡桶中的空气压力将脱泡好的泥浆进行注浆成型。

It is used to shape the packaged liquid lactone tofu by means of heating and sterilize it by means of pasteurism.

用于将封装完毕的液体内酯豆腐加成型及巴氏灭菌。

The manual stamping or casting is used to mold eave tile, drip tile, tile with animals, nail head and glassless window.

琉璃瓦中的勾头，滴水瓦件以及走兽、钉帽、花窗和正吻、垂兽等构件采用手工成型或注浆成型。

Methods of enhancing dispersing mixability in dynamic molding process,the structure of the dynamic mixing extruder and its operation principles were introduced.

介绍了基于动态成型过程强化分散混炼的方法以及实现这些方法的动态混炼挤出机的结构及工作原理。

It consists of main decoiler, assistant decoiler, guide rack, foming machine, forming mould, flatting device, punching device, cutting-to-length, collection table, electrical control， etc.

设备由主放料架、副放料架、导向机架、成型主机、成型模具、校正机构、冲孔机构、切断部分、收料台、电器控制部分等组成。

Aimed at utilization of iron resources in pyritic slag,the study on production of metallized agglomerate with pyritic slag through coal based DR process was conducted.

为合理利用硫酸烧渣中的铁资源，进行了煤基直接还原金属化团块的研究，提出了润磨造球-预焙烧-磁选-冷固结成型的新工艺流程。

Polybutylene terephthalate (PBT) is a semicrystalline thermoplastic polymer formed by a condensation process.

PBT是一种通过浓缩成型而制备的，一种半结晶热塑性塑料。

Made of shaping Polytetrafluorethylene Resin by moulding in ordinary temperature then through high heat sintering.

将聚四氟乙烯树脂在常温下用模法成型后再经温烧结制成。

The results indicate the melt processible fluoroplastics PVDF has good processing property of injection molding.

结果显示可熔融氟塑料PVDF具有较好的注射成型加工性能。

Shapen technological process and equipment of mold-made synchronous belt is introduced.

介绍模法橡胶同步带成型工艺流程及装备。

The molding method,process,and the equipment of thermoset runnerless injection molding have been discussed in this paper.

论述了无流道热固性塑料注射成型的方法、工艺、设备和模具设计方面的问题。

Bulk Molding Compound with high strength material with excellent moldability and moderate strength.Used in multi-purpose applications.

玻璃纤维增强团状模塑料，等强度和优异电性能，低成本，良好的成型性。广泛应用于各种领域。

Intensive Mixer(Banbury Mixer), Kneader Mixer, Pelletizer, Rubber Extruder, Rubber Preformer, 2 Roll Mixing Mill, Lab Machinery.

速混练机、强力混合机、造粒机、橡胶挤押机、过滤机、橡胶粗胚成型机、橡塑胶实验机。

This paper discribes electrosparking machine controller with 8031 SCP and it's implementation of aoftwate and hardware.

介绍由8031单片机组成的电火花成型机床控制器及其软、硬件配置.

It is mainly used for the forming cutting of fur, paper, leather, synthetize materical and nonmetal material.

主要适用于皮革、纸板、泡沫、人造革、布塑及合成纤维和非金属材料借助于刀模成型裁断。

It also can fried dumplings, egg roll, samosa, wonton and other foods by changing different forming part.

更换成型机头还可以包制锅贴、春卷、咖喱角和馄饨等食品。

The results show that underlayer oxhide,coloring agent and diluent solvent are the important effects of producing transfer-film leather.

研究了移膜革硫化成型效果的影响因素,结果表明,在移膜革生产,所选用的二层皮、着色剂及稀释溶剂是其主要的影响因素。

The same forces and mechanisms responsible for size enlargement in roller compaction are responsible for bond formation during tabletting.

碾加于颗粒增大的力和机理也用于片的粘合成型。

It is vibrating caulking forming by good quality binder.Good thermal conductivity,high compressive resistance,high anti-heat shocking ,unattackable,abrasion resistance,long service life.

采用优质结合剂，经振动密实成型，热导率好，耐强度，抗热震，耐侵蚀，耐冲刷，使用寿命长。

Straw, a kind of natural biodegradable material, was used as reinforced fibers for preparing nonrecurring biodegradable flowerpots by compression molding technology.

采用廉价的秸秆为增强材料,以淀粉为基体材料,通过模成型制备出一次性可生物降解花盆。

Together with the vacuum debubbling barrel, injecting and forming the debubbled mud with the air pressure in the vacuum debubbling barrel.

与真空脱泡桶配套使用，利用真空脱泡桶的空气力将脱泡好的泥浆进行注浆成型。

It is used to shape the packaged liquid lactone tofu by means of heating and sterilize it by means of pasteurism.

用于将封装完毕的液体内酯豆腐加热成型及巴氏灭菌。

The manual stamping or casting is used to mold eave tile, drip tile, tile with animals, nail head and glassless window.

琉璃瓦的勾头，滴水瓦件以及走兽、钉帽、花窗和正吻、垂兽等构件采用手工成型或注浆成型。

Methods of enhancing dispersing mixability in dynamic molding process,the structure of the dynamic mixing extruder and its operation principles were introduced.

介绍了基于动态成型过程强化分散混炼的方法以及实现这些方法的动态混炼挤出机的结构及工作原理。

It consists of main decoiler, assistant decoiler, guide rack, foming machine, forming mould, flatting device, punching device, cutting-to-length, collection table, electrical control， etc.

设备由主放料架、副放料架、导向机架、成型主机、成型模具、校正机构、冲孔机构、切断部分、收料台、电器控制部分等组成。

Aimed at utilization of iron resources in pyritic slag,the study on production of metallized agglomerate with pyritic slag through coal based DR process was conducted.

为合理利用硫酸烧渣的铁资源，进行了煤基直接还原生产金属化团块的研究，提出了润磨造球-预热焙烧-磁选-冷固结成型的新工艺流程。